RC4WD FUEL OFF-ROAD MAVERICK 1.9″ ALUMINUM BEADLOCK WHEELS BLACK (4) Z-W0200

DEEP-DISH FUEL STYLE WITH FUNCTIONAL BEADLOCK CONSTRUCTION

The RC4WD Fuel Off-Road Maverick 1.9-inch Beadlock Wheels combine CNC-machined billet aluminum with the licensed multi-spoke Maverick design, a deep-dish profile, contrasting silver scale hardware and a branded FUEL wheel-nut cover. This is a complete set of four black wheels for scale crawler and trail builds using a compatible standard 12 mm wheel hex.

Manufacturer part number Z-W0200 is the 1.9-inch Maverick version. It should not be confused with other Fuel Off-Road patterns, diameters or offsets simply because they share the same brand and 12 mm mounting standard.

GASHEAD RC QUICK READ

• Product: RC4WD Fuel Off-Road Maverick 1.9-inch beadlock wheels
• Manufacturer SKU: Z-W0200
• Quantity: Four wheels
• Finish: Black with silver scale hardware
• Material: CNC-machined billet aluminum
• Mount: Standard 12 mm hex
• Offset: Negative 0.35 in / 9 mm
• Licensed design: Fuel Off-Road Maverick

MANUFACTURER-PUBLISHED SPECIFICATIONS

MANUFACTURER DATA DISCREPANCY READ BEFORE FITMENT

RC4WD’s current product page and official wheel comparison sheet publish the weight as 3.36 oz / 67 g. Those figures are not equivalent. A direct conversion gives approximately 95.3 g for 3.36 oz, while 67 g is approximately 2.36 oz. Because the manufacturer does not resolve which side is correct, GASHEAD RC does not present a calculated four-wheel weight as confirmed data.

The product page also lists the center-hole OD as 0.20 in / 4.2 mm; 0.20 inch converts to approximately 5.08 mm, so that pair is likewise inconsistent. If center clearance or wheel mass is critical to the build, measure the physical wheel or obtain confirmation from RC4WD before relying on either value. All other dimensions above are reproduced from the manufacturer listing.

WHAT THE NEGATIVE OFFSET MEANS

RC4WD specifies a 9 mm negative offset for Z-W0200. In practical terms, offset affects how far the wheel and tire sit relative to the hex and therefore changes track width, steering-component clearance and body clearance. This can help create the deep-dish appearance of the Maverick design, but a standard 12 mm hex alone does not guarantee fitment.

Check wheel-nut seating, axle-thread engagement, steering-knuckle clearance, portal or hub clearance and tire-to-body contact at full steering lock and suspension compression.

FUNCTIONAL BEADLOCK AND SCALE DETAIL

• Mechanically captures the bead of a compatible tire without permanent tire glue
• CNC-machined aluminum structure with a full-width deep-dish appearance
• Scale hex bolts around the wheel face
• FUEL logo integrated into the design
• Scale wheel-nut cover with FUEL branding
• Serviceable assembly for tire and foam changes

Use controlled hand pressure when tightening miniature hardware. Start screws by hand and tighten progressively in a cross-pattern to keep the tire bead evenly seated.

CONFIRMED TIRE EXAMPLE

RC4WD shows these wheels installed with Rock Crusher II X/T 1.9-inch Tires, Z-T0030, as an example. Tires and foams are not included. RC4WD confirms compatibility within its own wheel-and-tire system but does not guarantee every cross-brand combination because bead shape, carcass construction and internal ring requirements vary.

A customer review on the manufacturer page mentions successful use with a 1.7-inch tire, but that is an individual user report rather than an RC4WD fitment specification. It is therefore not treated here as guaranteed compatibility.

WHAT IS INCLUDED

• 4 RC4WD Fuel Off-Road Maverick 1.9-inch Beadlock Wheels
• 1 Miniature Scale Hex Bolt Tool for M1.6 scale bolts, 1.5 mm hex RC4WD Z-S1328
• 1 Fuel Off-Road decal sheet

NOT INCLUDED

• Tires and foams
• Vehicle, axles, hex adapters or standard wheel nuts
• Optional precision driver set
• Replacement fasteners

GENERAL RC4WD BEADLOCK ASSEMBLY GUIDANCE

RC4WD’s general wheel-installation graphic advises removing every other bolt when servicing applicable beadlock assemblies. Confirm which fasteners are functional on this exact wheel before disassembly; do not loosen decorative hardware blindly. Seat the tire bead uniformly, tighten in stages and recheck the assembly after the first drive.

OPTIONAL TOOL AND REPLACEMENT HARDWARE

• Z-F0030: RC4WD 4-piece Precision Metric Hex / Nut Driver Set
• Z-S0649: M3 8 mm flat-head cap screws; RC4WD identifies 24 pieces for the complete wheel set. Verify service-pack quantity before ordering.
• Z-S1124: M1.6 4 mm silver Miniature Scale Hex Bolts; RC4WD identifies 32 pieces for the complete wheel set.

PRE-INSTALLATION CHECKLIST

1. Confirm the vehicle uses a compatible standard 12 mm hex.
2. Verify the center opening clears the axle and hub projection; do not rely on the inconsistent published conversion.
3. Test wheel-nut seating and axle-thread engagement.
4. Check steering, portal, link and shock clearance through the full range of travel.
5. Confirm tire bead compatibility and even seating before final tightening.
6. Inspect wheel nuts and beadlock hardware after the first run.

Brand: RC4WD
Licensed design: Fuel Off-Road Maverick
Manufacturer part number: Z-W0200
Finish: Black
Pack quantity: 4 wheels