RC4WD 6 LUG WAGON 1.9″ STEEL STAMPED BEADLOCK WHEELS CHROME / WHITE (4) Z-W0002

CLASSIC 6-LUG WAGON STYLE WITH TWO DISTINCT FACTORY CONFIGURATIONS

RC4WDs 6 Lug Wagon 1.9 wheels combine traditional stamped-steel styling with a removable center hub and an internal beadlock system. They are designed for scale trucks and trailers that need genuine metal construction and a period-correct wagon-wheel face instead of a modern machined-wheel appearance.

This listing contains two separate variants. Select Chrome or White before adding to cart. Each selection includes four wheels in the chosen finish; the two colors are not supplied together.

CHROME variant Z-W0002.WHITE variant Z-W0128.

SHARED CONSTRUCTION

• Traditional 6-lug wagon-wheel design
• Stamped-steel wheel construction
• Removable center hub
• Internal beadlock system
• Wheel size: 1.9 in
• Wheel width: 25 mm
• Designed for 1.9-inch tires
• Weight: 71 g / 2.5 oz per wheel
• Engineered by RC4WD Team UK

A complete four-wheel set weighs approximately 284 g before tires, foams and alternate hubs. That low-mounted steel mass can benefit crawler stability, but it also adds rotating and unsprung weight. Check motor temperature, gearing, braking response and suspension behavior after installation.

CHROME VARIANT Z-W0002

The Chrome version delivers the brighter, traditional show-truck appearance. RC4WD publishes a much shallower negative offset for this SKU than for the White variant, so the two finishes must not be treated as geometrically identical.

Measurement warning: 48.26 mm is approximately 1.90 inches, not 2.09 inches. Because the manufacturers Chrome page contains this internal unit conflict, buyers with tight body or suspension clearance should measure the physical wheel rather than relying on the conflicting inch figure.

CHROME Z-W0002 official front and finish detail.CHROME Z-W0002 stamped-steel profile and removable center detail.CHROME Z-W0002 internal beadlock construction view.CHROME Z-W0002 additional wheel and hardware detail.CHROME Z-W0002 official scale presentation.CHROME Z-W0002 additional manufacturer view.

WHITE VARIANT Z-W0128

The White version uses the same traditional 6-lug face and 25 mm width but carries a published 9 mm negative offset. RC4WD explicitly lists this variant as a pin-mount wheel and confirms fitment for the Gmade Sawback.

Verified manufacturer example: RC4WD shows the White Z-W0128 mounted with Gladiator Scale 1.9 tires. Tires are not included.

WHITE Z-W0128 official wheel detail.WHITE Z-W0128 shown with Gladiator Scale 1.9 tires; tires not included.WHITE Z-W0128 official beadlock and profile detail.WHITE Z-W0128 additional manufacturer view.

OFFSET DIFFERENCE: DO NOT CHOOSE BY COLOR ALONE

RC4WD publishes 2.55 mm negative offset for Chrome and 9 mm negative offset for White. That 6.45 mm difference is large enough to materially change where the wheel sits relative to the body and suspension. Final track width also depends on the hub, axle and hex arrangement.

Engineering interpretation: when comparing the published values directly, the White versions mounting geometry places the wheel differently from the Chrome version. Verify both inner clearance and tire-to-fender position on the actual chassis.

OPTIONAL HUBS AND MOUNTING COMPONENTS

RC4WD lists a 12 mm hex conversion path for this wheel family. The following optional wheel-hex components are identified on the manufacturer pages:

• Z-S0268 billet wheel hub / 6-lug hex upgrade for OEM stamped 1.9 wheels
• Z-S0530 optional 6-lug wheel hex
• Z-S0774 optional 6-lug wheel hex
• Z-S0779 optional 6-lug wheel hex
• Z-S0780 optional 6-lug wheel hex
• Z-S0239 RC4WD 12 mm axle wheel hexes, required by RC4WD when using the optional wheel-hex system
• Z-S1913 Narrow Stamped Steel Wheel Pin Mount, 6-lug

Changing hubs or mounting systems can alter offset and thread engagement. Confirm the axle interface, body clearance, steering-knuckle clearance and retaining hardware before driving.

INTERNAL BEADLOCK RING NOTE

The White product page lists Z-S0846 as the optional 1.9 Pro-Line tire-compatible internal beadlock ring. The current Chrome page displays Z-S9846, which conflicts with the White listing and RC4WDs established Z-S0846 part number. Confirm the required ring for the Chrome variant before ordering rather than relying on the apparent catalog typo.

TIRE COMPATIBILITY

These wheels are designed for 1.9-inch tires. RC4WD guarantees its own tire-and-wheel combinations, but does not guarantee every mixed-brand setup because tire beads vary in thickness and shape.

• Verified White example: Gladiator Scale 1.9 tires.
• For third-party tires, test bead seating before fully tightening the wheel.
• If using Pro-Line tires, verify the correct optional internal ring first.

WHAT IS INCLUDED

• 4 RC4WD 6 Lug Wagon 1.9 Steel Stamped Beadlock Wheels in the selected finish
• 2 M2.5 14 mm black socket-head cap screws

Not included: tires, foams, vehicle, axles, optional hubs, 12 mm axle hexes, alternate beadlock rings and tools.

REPLACEMENT HARDWARE

• Z-S0829 M2.5 8 mm black socket-head cap screws; RC4WD specifies 24 wheel fasteners
• Z-S0303 black M2.5 nuts; RC4WD specifies 24 wheel nuts
• Z-S0476 replacement hardware kit for OEM Steel 1.9 and Wagon wheels, listed on the White page

INSTALLATION CHECKLIST

1. Confirm the selected variant, especially the published offset difference between Chrome and White.
2. Confirm that the supplied pin-mount or selected optional hex system matches the axle.
3. Seat the tire beads evenly around the internal beadlock ring.
4. Start all wheel fasteners by hand and tighten gradually in an alternating pattern.
5. Inspect the complete bead circumference on both sides; no section should be pinched or pulled out.
6. Verify axle-thread engagement and rotate the wheel through full steering and suspension travel.
7. Check tire-to-body, wheel-to-knuckle, link and shock clearance before powering the vehicle.
8. Recheck the small fasteners after the first drive and during routine maintenance.

RC4WD does not publish a tightening torque on these pages. Use the correct tool and do not overtighten the M2.5 hardware.

GASHEAD RC FITMENT NOTE

These two variants look similar, but their published offsets are not the same. Choose by SKU and measured fitmentnot just finish. If the build has limited clearance, resolve the Chrome diameter-unit conflict and verify the selected hub system before final assembly.

Specifications, compatible parts and included hardware are based on the official RC4WD information for Z-W0002 and Z-W0128. Manufacturer images may show tires or installation components that are not included.