CKD0370 KAOS REAR UPPER & LOWER SUSPENSION LINKS (117MM, CNC ALUMINUM, RED ANODIZED, 3PCS) F450 DL-SERIES

CKD0370 KAOS REAR UPPER & LOWER SUSPENSION LINKS (117MM, CNC ALUMINUM, RED ANODIZED, 3PCS) F450 DL-SERIES

The CEN Racing CKD0370 KAOS Rear Upper & Lower Suspension Links Set is a three-piece rear-link upgrade for the CEN Ford F-450 DL-Series. CEN confirms 117 mm length, CNC aluminum construction, a red-anodized finish, and a 3-piece package.

CONFIRMED PRODUCT DETAILS

• Manufacturer: CEN Racing
• Product line: KAOS
• Part number / SKU: CKD0370
• Application: Rear upper & lower suspension links
• Link length: 117 mm
• Construction: CNC aluminum
• Finish: Red anodized
• Quantity: 3 pieces
• Vehicle fitment: CEN Ford F-450 DL-Series

WHAT THESE LINKS DO

The rear suspension links locate the rear axle relative to the chassis and define key rear-suspension geometry as the axle moves through compression and droop. Correct link length and mounting position affect axle location, pinion relationship, and suspension articulation, so CKD0370 should be installed only in the intended F-450 DL-Series configuration.

IMPORTANT: 4TH LINK IS NOT INCLUDED

CEN explicitly states that CKD0370 is the 3-piece KAOS CNC aluminum link set only and does not include the 4th-link set. For the matching rear red 4th-link component, CEN directs customers to CKD0379. CEN also lists CKD0378 as the corresponding red front 4th-link component.

COMPATIBILITY

CEN lists CKD0370 specifically for the F450 DL-Series. AMain independently identifies it as an optional rear upper/lower link set for the CEN F450 and confirms that the correct separate rear 4th-link set is CKD0379 / CEGCKD0379. GASHEAD RC does not extend compatibility to other CEN chassis without documented fitment.

INSTALLATION NOTES

• Confirm the truck uses the intended F-450 DL-Series rear suspension geometry.
• Install the three links in the correct rear upper/lower positions; do not treat the separate 4th-link part as included.
• Start all threaded hardware by hand to reduce cross-threading risk.
• After assembly, cycle the rear suspension through compression and droop and verify there is no link, driveshaft, shock, sway-bar, axle or chassis interference.
• Check that the rear axle sits square to the chassis and that the driveline does not bind through suspension travel.
• Recheck fastener security after the first driving sessions.

PACKAGE CONTENTS

CEN confirms the package contains 3 KAOS CNC aluminum rear links. AMain further describes them as three unassembled rear links. The rear 4th-link component is sold separately.

CUSTOMER-REPORTED EXPERIENCE

CEN’s official CKD0370 page currently shows 5 customer reviews, all five-star at the time of review. Comments mention fit, appearance and general satisfaction. These are customer-reported experiences, not manufacturer-certified strength, durability or handling measurements.

MANUFACTURER DATA NOT PUBLISHED

CEN’s current public listing does not publish aluminum alloy grade, temper, rod diameter, thread specification, exact end-to-end measurement method, individual link weight, anodizing thickness, recommended fastener torque, tensile strength, bending strength or quantified handling improvement. Those values are intentionally not estimated or invented.

Product designation, 117 mm length, CNC-aluminum construction, red-anodized finish, 3-piece quantity, F450 DL-Series fitment, 4th-link exclusion, current manufacturer price, review count and all eight official product/install images were checked against CEN Racing. AMain independently corroborates the three unassembled rear links and CKD0379 rear 4th-link requirement.